Getting roller shutters ready for winter: motor, rails, settings

Updated: 07.11.2026

In brief: Before winter you should clean the guide rails, check the end positions and adjust the automation. This prevents the roller shutter from freezing and the motor from being overloaded.

Checklist

1. Clear leaves and dirt from the guide rails.
2. Check slats for damage.
3. Check the lower end position – the curtain should rest, not press.
4. Adjust the timer automation to shorter days.
5. When there is a risk of frost, use a ventilation position instead of closing completely.
6. Replace batteries in hand transmitters.

Motor and frost

Motors with frost protection such as the A-OK AM45 radio stop when the curtain is frozen. What to do with ice: Roller shutter frozen. Saving a ventilation position: Intermediate position.

Awning in winter

Awnings should stay retracted in winter. A wind sensor protects in the transitional season, see Awning with wind sensor.

Frequently asked questions

Do I need to service the motor in winter?

Tubular motors are maintenance-free. But check bearings, adapters and end positions.

Does a closed roller shutter save heating costs in winter?

Yes, at night it reduces heat loss at the window. More: Roller shutter motor power consumption.

All guides on roller shutter, awning and external venetian blind motors: Sun protection guide.

Advice on the right motor

Send us the shaft diameter, curtain size and material – we will name the right A-OK motor. Phone 040 50694631 (Mon–Fri 8 am–5 pm) or via the Contact form. All motors at a glance: Sun protection motors.